Workflow

Compliance matrix for a tender: one row per requirement, from a live notice

A compliance matrix is a table with one row for every requirement in the tender, quoted word for word, with its source, whether it is mandatory or scored, its weight and the evidence that will prove it. Built before anyone writes, it stops a bid losing marks on a requirement nobody wrote down. Below is the start of one for DSB's IT outsourcing tender, worth EUR 120,393,284.73 and closing on 3 December 2026.

· 7 min read

As a minimum requirement, an average solvency ratio of at least 20.0% over the last three most recent available financial years is required.

Source: ted.europa.eu

DSB will score Quality of Service at 40, Price at 35 and Quality of Transition and Transformation at 25, published as percentages that sum to 100.

Evaluators mark against the words in their own documents. A compliance matrix makes sure every one of those words has an answer in yours. That includes the requirements that look too obvious to write down.

What is a compliance matrix?

It is the bid team's checklist against the buyer's documents. Victano's response-plan workflow sets out the columns this way:

ColumnWhat goes in it
#A running number, so reviewers can refer to a row
Requirement (quoted)The buyer's exact words
Source doc, section, pageWhere the buyer wrote it
Mandatory or scoredPass or fail, or marked for quality
WeightThe points or percentage, for scored rows
Where we answer itThe section of your response
OwnerThe person who writes or proves it
Evidence neededCertificates, figures, references, CVs
StatusOpen, drafted, checked
Columns from Victano's response-plan workflow, read 19 November 2026.

The reason for quoting is in the same workflow: "Paraphrase drifts, and evaluators mark against the words in their own document."

What does one look like on a real tender?

DSB published an English-language notice on TED for a tender for agreement on outsourcing of IT infrastructure and services, worth EUR 120,393,284.73 and closing on 3 December 2026. The buyer encoded four selection criteria and three scored award criteria. These are the rows the notice itself can fill:

#Requirement (quoted or coded)TypeEvidence named in the notice
1"The applicant must submit the European Single Procurement Document"MandatoryThe ESPD
2"an average solvency ratio of at least 20.0% over the last three most recent available financial years"Mandatory"A declaration of the applicant’s solvency ratio" or an excerpt from the annual reports
3Financial standing: turnover (coded as a turnover requirement)MandatoryLevel not in the notice text we hold
4A qualification scheme or independent certificate (coded)MandatoryWhich one is in the documents
5Technical and professional ability: references, staff, equipment (coded)MandatoryWhich ones are in the documents
6Quality of ServiceScored, 40%Your service description
7PriceScored, 35%Your price schedule
8Quality of Transition and TransformationScored, 25%Your transition plan
9A guarantee is requiredMandatoryIts form is in the documents
Rows from TED notice 786835-2026 as Victano read_document returned them on 19 November 2026. Quoted text is the buyer's English; coded rows use the tool's description of the buyer's code.

Rows 3, 4, 5 and 9 are the useful ones. The buyer said the requirement exists and did not put its level in the part of the notice we hold. A matrix that drops them because the notice is silent is the matrix that gets a bid rejected.

How should the weights shape the work?

DSB award criteria, percent of the score

  1. Quality of Service40
  2. Price35
  3. Quality of Transition and Transformation25
Victano read_document, ted:786835-2026, award criteria and what each is scored on, 19 November 2026 at 11:24 UTC. Weights are expressed as a percentage, the criteria should sum to 100.

The workflow's rule is to write the allocation out: criterion, weight and your confidence in each. "Where a high weighting meets low confidence, that is the top of the work queue." Where a low weight meets high confidence, do not gold-plate it. Here the service section is worth more than the price, so it gets your strongest writer and the most review time.

Check the unit before you allocate. Some buyers publish points that do not sum to 100. DSB published percentages, and the tool says so in weights_expressed_as.

What if the notice does not hold the whole requirement?

Say so in the matrix, and go to the documents. For DSB, the selection text we hold stops mid-sentence after the solvency rules, so the turnover level, the certificate and the reference requirements are not in it. The tool did compute one thing you can check against: the cap on a turnover requirement under Directive 2014/24/EU, which for this contract value is EUR 240,786,569.46.

DSB is one of the better cases. Across every open notice Victano held on 19 November 2026, the buyer had encoded its selection criteria in the notice for 15,521 of 84,678. For the rest, the matrix starts from the documents.

Recorded run · 4tool calls

You

Build the start of a compliance matrix for an open IT tender in English with its criteria in the notice. Which rows can you fill now, and which need the documents?

search_opportunitiesquery "software development and IT support services", countries IE, MT, CY, NL, SE, DK, FI, status open, criteria_stated true

379 notices match; first is DSB, IT outsourcing, EUR 120,393,284.73, closes 3 December 2026

read_documentted:786835-2026

four selection criteria coded (two financial standing, one certification, one technical ability); solvency ratio of at least 20.0% quoted; award criteria Price 35, Quality of Transition and Transformation 25, Quality of Service 40, as percentages; guarantee required

get_opportunityted:786835-2026

selection text cut after the solvency rules; turnover cap under Directive 2014/24/EU EUR 240,786,569.46

get_workflowresponse-plan

the matrix columns, the rule to quote rather than paraphrase, and to allocate effort by weight

Your assistant

Nine rows now: the ESPD, the solvency ratio, three coded selection criteria, three scored award criteria and the guarantee. Five of them can be completed from the notice.

Rows 3, 4, 5 and 9 stay open until the procurement documents are read, because the notice names those requirements without the level or the form.

Four real calls to mcp.victano.com on a signed-in test account, 19 November 2026 between 11:01 and 11:25 UTC, data as of 04:20 UTC. We wrote the question and the answer's wording; every name, sum, date and count is from the tools' output.

Which mistakes cost marks?

  1. Skipping the easy rows. In the workflow's words: "A matrix that covers the hard requirements and skips the easy ones is how a bid gets rejected on a formality nobody thought worth writing down."
  2. Paraphrasing. Your summary of a requirement is not what the evaluator marks against.
  3. Reading points as percentages, or the reverse, and putting the effort in the wrong section.

Before you submit

  1. Building the matrix from the notice alone and not saying so. Record which document each row came from, so the gaps are visible.
  2. Planning forwards from today. Work backwards from the deadline in working days, with the clarification deadline first and a buffer for the upload, because, in the workflow's words, you should "assume the portal fails; it does".

The bid writing guide puts the matrix in the order of the whole bid, and the bid/no-bid checklist comes before it. For the declaration behind rows 1 to 5, see what the ESPD asks you to declare.

Do this in your assistant

Paste this

Read https://victano.com/start.md and follow the onboarding instructions. Then open the tender [TED notice number or link] and build a compliance matrix: one row per requirement, quoted, with its source, mandatory or scored, and weight. Mark every row whose level or form is not in the notice as open, and tell me which documents to load to close it.

Connector address

https://mcp.victano.com/mcp

Search and notice records work without an account. Setup for each assistant is on /install; the bid-ready pack shows the full output.

This page describes a working method and one public notice. It is not legal advice; the buyer's documents decide what a compliant bid is.

Questions people ask

What is a compliance matrix? A table that lists every requirement of a tender, one per row, with its source, whether it is mandatory or scored, and its weight. It also says where the response answers it, who owns it and what evidence proves it.

Timing and coverage

When should the compliance matrix be built? First, before writing starts, and again when the full documents and the buyer's answers to clarification questions arrive.

Should it include requirements that are obviously met? Yes. Easy rows are the ones that get missed, and a missed mandatory row can end the bid.

Can an AI assistant build one? It can build the first pass from the notice and the documents you load: quoted rows, sources and weights. A person checks it against the full documents and fills the owner and evidence columns.

No sign-up form. Your assistant does the rest.

Say this to Claude Code, Cursor or any assistant that sets itself up, and it connects itself.

Read https://victano.com/start.md and follow the onboarding instructions.